alloy steel seamless tubes
"
Μηχανικός άνευ ραφής τραβηγμένος στο κρύο σωλήνας χάλυβα σωλήνας χάλυβα μεγέθους ASTM A519 1045 6 - 88mm OD
Product Name: ASTM A519 Cold Drawn Seamless Mechanical Tubing , Carbon and Alloy Mechanical Steel Tub Material:1010, 1020, 1026, 1045, 4130, 4140 Size Range: OD: 6-88mm, WT: 1-15mm, Length: 5.8m/6m, maximal 11.8m Delivery Condition: CW, SR, A, N Application: For mechanical application Quality Control: 1. Incoming Raw Material Inspection 2. Raw Material Segregation to avoid steel grade mix-up 3. Heating and Hammering End for Cold Drawing 4. Cold Drawing or Cold Rolling, On
En10216-2 διευκρινισμένος ανυψωμένος σωλήνας λεβήτων θερμοκρασίας άνευ ραφής
1. Product Name: EN10216-2 Seamless Carbon and Alloy Steel Tubes with Specified Elevated Temperature Properties 2. Size Range: OD: 10-256mm, WT: 1-30mm, Length: 5.8m/6m, maximal 11.8m 3. Stable Quality with Comeptitive Price Your special requirement is highly welcomed and will be fulfilled. We always provide highest quality seamless pipe/tube and best service. 100% Eddy Current Testing. 100% Size Tolerance Checking. 100% Tube surface checking to avoid surface defects. Product
GB3087 άνευ ραφής τραβηγμένη στο κρύο χαμηλή μέση πίεση σωλήνων χάλυβα για τους λέβητες
GB3087 Low Medium Pressure Seamless Carbon Steel Pipes For Boilers Standard:GB3087 Seamless Carbon Steel Tubes for Low And Medium Pressure Boiler Steel Grade/Steel Material/Steel Number: Grade Chemical Analysis % C Si Mn Cr Ni Cu 10 0.07-0.13 0.17-0.37 0.35-0.65 ≤0.15 ≤0.30 ≤0.25 20 0.17-0.23 0.17-0.37 0.50-0.80 ≤0.25 ≤0.30 ≤0.25 Grade Mechanical Properties Rm/Mpa Rel/Mpa A/% WT≤16 WT＞16 10 335-475 205 195 ≥24 20 410-550 245 235 ≥20 Size Range: OD: 6-350mm WT:1-35mm Length:4
Ανώτατος σωλήνας τρυπανιών 80Mpa χωρίς συγκόλληση SAE4130/υλικό μέγεθος σιταριού 9 βαθμού AISI4130
ASTM A519 SAE4130 AISI4130 seamless drill pipe for wire-line drill rods COLD DRAWN SEAMLESS ALLOY STEEL TUBES STEEL GRADE: SAE/AISI4130 SPECIFICATIONS: ASTM A519 WITH FOLLOWING REQUIREMENTS. MECHANICAL PROPERTIES Tensile Min 725MPa Yield Min 620MPa Elongation (50.8mmG.L) Min 15% Hardness 230-280 HB Condition Stress relieved. Straightness better than: 1 in 2000 MAX (1MM DEVIATION IN 2000MM) Eccentricity (Max) 5% Grain size ≥ 9 according to ASTM E112 Residual Hoop stress
TP316 σωλήνωση ανοξείδωτου
ASTM A269/ASME SA269 Stainless steel 316L/S31603 seamless bright annealed tubing We always have stock of normal export size by materials 316L bright annealed: STOCK SIZE 4.76*0.71mm/4.76*0.89mm/4.76*1.24mm 6*1mm/6*1.5mm 6.35*0.71mm/6.35*0.89mm/6.35*1.24mm/6.35*1.65mm 7.94*0.71mm/7.94*0.89mm/7.94*1.24mm/7.94*1.65mm 9.53*0.71mm/9.53*0.89mm/9.53*1.24mm/9.53*1.65mm 10*1mm/10*1.5mm/10*2mm 12*1mm/12*1.5mm 12.7*0.71mm/12.7*0.89mm/12.7*1.24mm/12.7*1.65mm 14*1mm/14*1.5mm/14.1*2mm 15
Διπλός φωτεινός ανοπτημένος σωλήνας ανοξείδωτου ASTM A789 S32760
ASTMA789 S32760 duplex bright annealed stainless steel tube Materials:USA S32760,S32205 2507 Application:For boiler pressure system 1. Commodity: seamless S32760 Duplex stainless steel tube 2. Process method: cold finished 3. Surface finish: annealing, pickling and polishing as required 4. Material Grades: S31803, S31500, S32205/SAF2205, S32304/SAF2304, S32750/SAF2507, S32760. 5. Specifications: ASTM A789,ASME SA/A789, SA/A790, EN10216-5, etc. 6. Size: A) NPS: 1/8" to 6" B)
σωλήνες χάλυβα Corten πάχους 150mm OD 0.8mm 1000mm μήκος
CORTEN A Steel is Corrosion Tensile Atmospheric Resistant Welded Steel Pipes and Steel Tubes Cor-Ten A atmospheric corrosion resistant welded pipes/ERW Steel Tubes COR-TEN A Steel is atmospheric corrosion resistant steel,Corrosion-Tensile Steel,high strength steel The purity of the steel of fine grade austenitic quality and the addition of special alloys, provide this steel , excellent mechanical characteristics, even at high temperatures and self-passivating properties when
Γυαλισμένη σωλήνωση ανοξείδωτου ASTM A312/A213M TP304
ASTM A312/A312M TP304/TP304L Thin Wall Stainless Steel Tubing Thin wall thickess stainless tubes for precision roller Normal sizes:133x3mm;159x3.5mm;159x4.5mm;89x4mm Material Stainless Steel TP304/TP304L/TP316/TP316L Shape Round tubes/ Square tubes / Rectangle tubes/Profile tubes Production Standards ASTM A270, ASTM A269, ASTM A249, ASTM A778, ASTM A789, DIN 11850, EN 10357, EN 10217-7 Outer Diameter The normal stainless pipes sizes from 6mm - 300mm ; Thickness 0.8mm - 20 mm
Γυαλισμένος σωλήνας ISO9001 ανοξείδωτου ASTM A312/A213M TP304
ASTM A312 / A213M TP304 Polished Stainless Steel Tube ISO9001 ASTM A312/A312M TP304/TP304L Thin Wall Stainless Steel Tubing Thin wall thickess stainless tubes for precision roller Normal sizes:133x3mm;159x3.5mm;159x4.5mm;89x4mm Material Stainless Steel TP304/TP304L/TP316/TP316L Shape Round tubes/ Square tubes / Rectangle tubes/Profile tubes Production Standards ASTM A270, ASTM A269, ASTM A249, ASTM A778, ASTM A789, DIN 11850, EN 10357, EN 10217-7 Outer Diameter The normal
