cold drawn seamless steel tube
"
Στρογγυλός υψηλός χωρίς συγκόλληση σωλήνας, σωλήνας χάλυβα χαμηλού άνθρακα 5,8 - 11.8M μακρύς
Standard: ASTM A192 / SA 192 Boiler Carbon Steel Seamless Cold Drawn Round Shape Steel Tube for High Pressure Service Application: For seamless carbon steel boiler and superheated tubes for high-pressure service Size(mm): O. D.: 6.0~114.0 W. T.: 1~15 L: Max 12000 Packing: 1. Standard export bundle wrapped with strong steel strip 2. Wooden case 3. Nylon packed Payment: T/T Delivery: With 45 days of order confirmation Your special requirement is highly welcomed and will be
Σωλήνας Astm A192 λεβήτων ακρίβειας, σωλήνωση υψηλού χάλυβα θερμικής επεξεργασίας
Standard: SA192 Cold Drawn Seamless Carbon Boiler Steel Tube for High Pressure Service Application: For seamless carbon steel boiler and superheated tubes for high-pressure service Size(mm): O. D.: 6.0~114.0 W. T.: 1~15 L: Max 12000 Packing: 1. Standard export bundle wrapped with strong steel strip 2. Wooden case 3. Nylon packed Payment: T/T Delivery: With 45 days of order confirmation Your special requirement is highly welcomed and will be fulfilled. We always provide
Αντιδιαβρωτικός σωλήνας N06600 κραμάτων νικελίου άνευ ραφής για το συμπυκνωτή και τον ανταλλάκτη θερμότητας
Nickel Alloy N06600 Seamless Nickel Alloy Condenser and Heat-Exchanger Tubes with Corrossion Resistant Alloy stainless Common grades N02200, N04400, N06600, N06601, N06617, N06625, N06690, N08800, N08810, N08811, N08825, N08020, N08367, N08028, N06985, N06022, N10276, N10665 and so on. Common standards ASTM B163 ASME SB163) Seamless nickel and nickel alloy condenser and heat exchanger tube ASTM B165(ASME SB165) Seamless nickel - copper alloy seamless nominal pipe and tube
2205 S31803 A790 άνευ ραφής λεβήτων σωλήνωση ανοξείδωτου σωλήνων διπλή άνευ ραφής
32x2.5mm S31063 34.3x7mm 2205 ASTM A790/A790M S31803 Duplex Seamless Stainless Steel Tubing,stainless heater tubes stainless boiler pipe Test relevant norm: A370 Test Methods and Definitions for Mechanical Testing of Steel Products A923 Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels A941 Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys A999/A999M Specification for General Requirements
Στρογγυλός σωλήνας GB/T 24187 κυλίνδρων χάλυβα ακρίβειας τραβηγμένος στο κρύο για τον εξατμιστήρα
GB/T 24187 Cold-Drawn Precision Single Welded Steel Tubes Spec: Material:C Si Mn P S Size Range:OD:3.18-18mm WT:0.3-1.3mm General Length:1.5-4m Tolerance: According to the following tables or customers’ request. Table 1 Outer diameter, wall thickness and theoretical weight OD/mm WT/mm 0.30 0.40 0.50 0.60 0.65 0.70 0.80 0.90 1.00 1.30 theoretical weight /(kg/m) 3.18 0.0213 0.0274 0.0330 4.00 0.0274 0.0355 0.0432 0.0503 4.76 0.0330 0.0430 0.0525 0.0616 0.0659 0.0701 5.00 0.0348
En10297-1 παραμορφωμένοι κρύο χωρίς συγκόλληση σωλήνες 42CrMo4 χάλυβα κραμάτων
EN10297-1 Seamless Cold-Deformed Steel Pipes 42CrMo4 Mechanical Alloy Steel Seamless Tubes 42CrMo4/AISI4140 EN10297-1 Seamless cold-deformed steel pipes 42CrMo4/42CrMo4 hollow steel bars General for 42CrMo4 hollow steel 42CrMo4 is a steel for quenching and tempering, which has a good combination of strength and toughness in the quenched and tempered condition. After oil quenching it will be through hardened up toØ60 mm bar diameter. The micro structure of bigger dimensions is
En10305-4 πλαστικός σωλήνας ΚΑΠ σωλήνων DOM χωρίς συγκόλληση τραβηγμένος στο κρύο γύρω από τη μορφή
Products Description: EN10305-4 Seamless Cold Drawn Tubing DOM Steel Pipe for Hydraulic and Pneumatic Power Systems Steel Grade/Steel Material: Chemical composition(cast analysis)a Steel Grade % by mass Name Number C max Si max Mn max P max S max Altot min E215 1.0212 0.10 0.05 0.70 0.025 0.015 0.025 E235 1.0308 0.17 0.35 1.20 0.025 0.015 - E355b 1.0580 0.22 0.55 1.60 0.025 0.015 - a Elements not included in this table (but see footnote b) shall not be intentionally added to
Χωρίς συγκόλληση σωλήνας ακρίβειας συμπυκνωτών, φωτεινός σωλήνας χάλυβα κραμάτων επιφάνειας άνευ ραφής
1. Product Name: Seamless Cold Drawn Steel Heat Exchanger Tubes and Condenser Tubes ASTM A179 2. Size Range: OD: 3.2-76.2mm, WT: 1-10mm, Length: 5.8m/6m, maximal 11.8m 3. Stable Quality with Comeptitive Price 4. High Preformance and Longer Working Life Quality Control: 1. Incoming Raw Material Inspection 2. Raw Material Segregation to avoid steel grade mix-up 3. Heating and Hammering End for Cold Drawing 4. Cold Drawing or Cold Rolling, On line inspection 5. Heat Treatment 6.
Δομική σωλήνωση μετάλλων DOM, υποστηρίγματα μηχανών 1 ίντσα γύρω από τη σωλήνωση χάλυβα
Product Name: Mechanical Cold Drawn Welded DOM Steel Tubing ASTM A513 Type5 with the Internal Weld Seam Removed Size(mm): O. D.: 6.0-168.0 W. T.: 1.0-15.0mm L: Max 12000mm DOM Steel Tubing, is a welded mechanical round steel tube with the internal weld seam removed creating a smooth internal surface. DOM round steel tube has been drawn over a mandrel to produce a tube having more exact dimensional accuracy and tolerances, and a very smooth insde and outside finish. DOM steel
