dom round steel tube
"
το ΒΑΡΟΣ DIN2393 30mm ένωσε στενά την τραβηγμένη στο κρύο μηχανική σωλήνωση DOM
Welded cold drawn steel round tubing,DOM steel tubing for Hydraulic and Pneumatic cylinders, precision roller,rubber bush. Size Range: OD: 5.0-3290mm WT:0.5-30mm Length: max 12000mm DOM(weld drawn-over-mandrel) Steel Tubing Characteristic: Good concentricity Good OD and ID tolerance High Precision Stable quality Smooth Roughness High Straightness Production Processs: Seamless tube and Cold Drawing or Cold Rolling Production Steel Grade/Steel Material: Steel Grade % by mass
En10305-4 πλαστικός σωλήνας ΚΑΠ σωλήνων DOM χωρίς συγκόλληση τραβηγμένος στο κρύο γύρω από τη μορφή
Products Description: EN10305-4 Seamless Cold Drawn Tubing DOM Steel Pipe for Hydraulic and Pneumatic Power Systems Steel Grade/Steel Material: Chemical composition(cast analysis)a Steel Grade % by mass Name Number C max Si max Mn max P max S max Altot min E215 1.0212 0.10 0.05 0.70 0.025 0.015 0.025 E235 1.0308 0.17 0.35 1.20 0.025 0.015 - E355b 1.0580 0.22 0.55 1.60 0.025 0.015 - a Elements not included in this table (but see footnote b) shall not be intentionally added to
Ακρίβεια DIN2393 st34-2 BK Ενωμένοι στενά τραβηγμένοι στο κρύο σωλήνες σωλήνων χάλυβα
DIN2393 ST34-2 BK Precision Welded Cold Drawn Tubes Size Range: OD: 10-156mm WT:1-25mm Length: max 12000mm DOM(weld drawn-over-mandrel) Steel Tubing Characteristic: Good concentricity Good OD and ID tolerance High Precision Stable quality Smooth Roughness High Straightness Production Processs: Cold Drawing Steel Grade/Steel Material: Steel Grade % by mass Name Number C max Si max Mn max P max S max Altot min Rst34-2 1.0034 0.15 0.30 0.60 0.025 0.0215 - Rst37-2 1.0038 0.17 0
Ενωμένος στενά σωλήνας χάλυβα DIN2393 St52.3 BK για τον άξονα Drive
DIN2393 St52.3 BK Welded Precision Steel Tube for Drive Shaft Size Range: OD: 5.0-329mm WT:0.5-30mm Length: max 12000mm DOM(weld drawn-over-mandrel) Steel Tubing Characteristic: Good concentricity Good OD and ID tolerance High Precision Stable quality Smooth Roughness High Straightness Production Processs: Cold Drawing Steel Grade/Steel Material: Steel Grade % by mass Name Number C max Si max Mn max P max S max Altot min Rst34-2 1.0034 0.15 0.30 0.60 0.025 0.0215 - Rst37-2 1
